For many years there was just one dependable method to keep information on your computer – employing a disk drive (HDD). Nonetheless, this type of technology is actually showing its age – hard drives are really noisy and sluggish; they can be power–ravenous and frequently produce a great deal of warmth for the duration of intensive procedures.

SSD drives, however, are swift, take in a lot less energy and are also far less hot. They furnish a whole new method to file accessibility and data storage and are years in advance of HDDs in relation to file read/write speed, I/O operation as well as energy efficiency. Observe how HDDs fare against the more recent SSD drives.

1. Access Time

Image

SSD drives offer a brand–new & impressive method to data safe–keeping in accordance with the usage of electronic interfaces as an alternative to any kind of moving parts and revolving disks. This unique technology is considerably quicker, allowing for a 0.1 millisecond file accessibility time.

Image

HDD drives still take advantage of the same general data file access technique which was originally created in the 1950s. Despite the fact that it was much upgraded ever since, it’s slow in comparison with what SSDs are offering. HDD drives’ data file access speed can vary in between 5 and 8 milliseconds.

2. Random I/O Performance

Image

The random I/O performance is crucial for the functionality of a data file storage device. We have conducted substantial lab tests and have confirmed an SSD can manage at the least 6000 IO’s per second.

Image

With an HDD drive, the I/O performance steadily raises the more you use the drive. Even so, just after it gets to a specific limitation, it can’t proceed speedier. And because of the now–old technology, that I/O limitation is noticeably less than what you can have with an SSD.

HDD can only go as much as 400 IO’s per second.

3. Reliability

Image

SSD drives are lacking any kind of moving parts, meaning there’s significantly less machinery inside them. And the less physically moving parts you’ll find, the lower the possibilities of failing can be.

The regular rate of failing of an SSD drive is 0.5%.

Image

HDD drives utilize rotating hard disks for keeping and reading files – a technology going back to the 1950s. Along with hard disks magnetically suspended in mid–air, spinning at 7200 rpm, the probability of one thing failing are generally higher.

The normal rate of failure of HDD drives varies amongst 2% and 5%.

4. Energy Conservation

Image

SSD drives are usually smaller compared to HDD drives as well as they lack any moving components at all. This means that they don’t generate as much heat and require a lot less energy to operate and much less power for cooling down reasons.

SSDs take in somewhere between 2 and 5 watts.

Image

From the moment they were built, HDDs were always very electric power–ravenous products. Then when you’ve got a web server with a couple of HDD drives, it will raise the per month electric bill.

Normally, HDDs use up in between 6 and 15 watts.

5. CPU Power

Image

SSD drives permit speedier data access rates, which generally, in return, allow the CPU to finish data requests much quicker and to return to additional responsibilities.

The average I/O wait for SSD drives is just 1%.

Image

In comparison with SSDs, HDDs permit reduced data file accessibility rates. The CPU will be required to wait around for the HDD to come back the demanded data, saving its assets in the meanwhile.

The average I/O delay for HDD drives is approximately 7%.

6.Input/Output Request Times

Image

It is time for several real–world cases. We, at NET EXPRESS MARKETING, produced a complete system backup on a server only using SSDs for data storage reasons. During that procedure, the standard service time for an I/O call remained below 20 ms.

Image

Using the same web server, yet this time built with HDDs, the outcome were completely different. The normal service time for any I/O call changed somewhere between 400 and 500 ms.

7. Backup Rates

Image

An additional real–life enhancement will be the rate at which the data backup was produced. With SSDs, a hosting server data backup currently can take under 6 hours using our web server–enhanced software solutions.

Image

On the other hand, on a hosting server with HDD drives, a comparable data backup will take three or four times as long to complete. A complete backup of an HDD–driven web server may take 20 to 24 hours.

With NET EXPRESS MARKETING, you will get SSD–powered website hosting services at affordable prices. Our web hosting plans as well as the VPS servers include SSD drives by default. Get an account along with us and observe how your websites can become better automatically.

  • Service guarantees

  •  
  • Each one of our Virtual Private Servers is configured for you free of cost. 99.9% network uptime. Full root server access privileges.

  • Compare our prices

  •  
  • Find out more about our pricing and pick the most suitable Virtual Private Server for your powerful sites. You can upgrade to a more feature–rich VPS Web Hosting configuration with just a mouse click.
  • Compare our hosting plans

  • Contact Us

  •  
  • Our representatives are available for you 7 days a week to reply to any questions with regards to our VPS Web Hosting solutions. 60–min reply–back time frame warranty.